maximum ratings and electrical characteristics rating 25 c ambient temperature uniess otherwies specified. single phase half wave, 60hz, resistive or inductive load. for capacitive load, derate current by 20%. type number maximum recurrent peak reverse voltage maximum rms voltage maximum dc blocking voltage maximum average forward rectified current peak forward surge current, 8.3 ms single half sine-wave superimposed on rated load (jedec method) maximum instantaneous forward voltage at 5.0a maximum dc reverse current ta=25 c at rated dc blocking voltage ta=125 c typical junction capacitance (note1) typical thermal resistance r jl (note 2) 5.0 amp surface mount silicon rectifiers notes: 1. measured at 1mhz and applied reverse voltage of 4.0v d.c. 2. thermal resistance junction to lead. mechanical data * case: molded plastic * epoxy: ul 94v-0 rate flame retardant * metallurgically bonded construction * polarity: color band denotes cathode end * mounting position: any voltage range current features * ideal for surface mount applications * easy pick and place * built-in strain relief * low forward voltage drop 50 to 1000 volts 50 100 200 400 600 800 1000 v 50 100 200 400 600 800 1000 v 35 70 140 280 420 560 700 5.0 100 5.0 250 60 -65 +150 v a v pf 1.15 10 a c c/w operating and storage temperature range t j, t stg a a at tl=75 c s5ab thru s5mb dimensions in inches and (millimeters) .220(5.59) .200(5.08) .185(4.70) .160(4.06) .012(0.31) .006(0.15) .083(2.11) .075(1.91) .096(2.44) .083(2.13) .050(1.27) .030(0.76) .155(3.94) .130(3.30) .008 (.203) max. do-214aa(smb) s5ab s5bb s5db S5GB s5jb s5kb s5mb units 5.0 amperes a l l d a t a s h e e t . c o m
.1 1.0 10 100 rating and characteristic curves (s5ab thru s5mb) fig.3 - typical reverse characteristics reverse leakage current, ( a) 0 20 40 60 80 100 120 140 .01 tj=100 c tj=25 c 0.1 1.0 .01 10 50 characteristics instantaneous forward current,(a) forward voltage,(v) pulse width 300us 1% duty cycle .6 .7 .8 .9 1.0 1.1 1.2 1.3 3.0 tj=25 c fig.2-typical forward current derating curve average forward current,(a) 1.0 2.0 3.0 4.0 5.0 6.0 single phase half wave 60hz resistive or inductive load 0.375"(9.5mm) lead length fig.4-maximum non-repetitive forward surge current 20 0 40 60 80 100 number of cycles at 60hz 1 10 5 50 100 tj=25 c 8.3ms single half sine wave jedec method fig.5-typical junction capacitance reverse voltage,(v) junction capacitance,(pf) 140 120 100 80 60 40 20 0 .01 .05 .1 .5 1 5 10 50 100 fig.1-typical forward 0 0 20 40 60 80 100 120 140 160 180 200 peak forward surge current,(a) percent of rated peak reverse voltage,(%) lead temperature,( c) a l l d a t a s h e e t . c o m
|